- All Categories (3682)
- Data (6)
- News (15)
- Missions (1)
- Events (13)
- Tools (4)
- Activities (3)
- Documents (3640)
Document - General Reference
AATSR-Global-Change-and-Surface-Temperature-Measurements-from-Envisat.pdf
This article was published in the ESA Bulletin Nr. 105 and provides full details on the AATSR instrument and its objectives.
Document - Proceedings
EO-Summer-School-4-An-introduction-to-marine-optics-and-ocean-colour-products-algorithms.pdf
This presentation from ESA's EO Summer School 4 is an introduction to marine optics and ocean colour products & algorithms
Document - Proceedings
EO-Summer-School-4-Understanding-biological-variability-in-the-open-ocean-GLOBCOLOUR-project.pdf
This presentation from ESA's EO Summer School 4 describes GLOBCOLOUR project
Document - Conference Presentation - Poster
05_Thursday_OCT13_BeamPractical.pdf
Practical exercises with MERIS data using BEAM Dr. Carsten Brockmann Practical exercises with BEAM Dr. Carsten Brockmann
Document - Conference Presentation - Poster
8-Use_SAR_observing_Polar_lows.pdf
Use of SAR in observing Polar lows Birgitte Furevik (Norwegian Meteorological Inst., Norway)
Document - Software Verification Plan/Report
Verification of the BUFR Form of the AATSR Meteo Product
Verification of the BUFR Form of the AATSR Meteo Product. This document describes the verification applied to the AATSR Meteo product (ATS_MET_AX) in its BUFR form
Document - Software Verification Plan/Report
Decoding-Software-for-ERS-Data-for-FM94-BUFR.pdf
This document describes how to decode ERS Low Bit Rate (LBR) Fast Delivery (FD) products from the World Meteorological Organisation (WMO) standard FM94 BUFR format required for transmission to users via the WMO Global Telecommunications System (GTS).
Document - Product Document
Single-Sensor-Error-Statistics-Report-for-(A)ATSR-L2P-Project.pdf
This document contains the specification for Single Sensor Error Statistics (SSES) for the L2P project. The document summaries the inputs, methodology for producing SSES and output L2P file format definitions, for ATSR-1, ATSR-2 and AATSR.
Document - Product Cal/Val Plan/Report
Validation Report following the 3rd MERIS data reprocessing
This document prepared by the MERIS Quality Working Group (QWG) corresponds to the Validation Report following the 3rd MERIS data reprocessing. It aims at qualifying and quantifying the accuracy of the MERIS L2 products generated with the version 8.0 of MERIS Ground Segment prototype (MEGS), delivered to the whole community through the ODESA software (http://earth.eo.esa.int/odesa/). It is equivalent to version 6.0 of the Instrument Processing Facilities (IPF) at ESRIN.
Document - Product Cal/Val Plan/Report
ERS-2-OPR-Product-Validation-Report.pdf
This report focuses on the inspection of the OPR products and the associated user documentation.
Document - Product Document
ENVISAT_AATSR_consolidated_Level-0_dataset_completeness.pdf
This document reports on the completeness of the AATSR consolidated Level 0 dataset. The analysis was performed by IDEAS and includes recommendations for building a clean and complete consolidated Level 0 dataset for reprocessing campaigns
Document - Product Cal/Val Plan/Report
Visible Channel Long Term Drift Analysis Using Desert Targets
Visible Channel Long Term Drift Analysis Using Desert Targets. The stability of AATSR visible channel calibrations have been measured using data from stable desert targets. The calibration drift rates obtained from the time-series are less than 3.5% per year and comparable to those measured for ATSR-2. Application of the drift correction to AATSR L1B images is discussed.
Document - Product Cal/Val Plan/Report
ENVISAT-MERIS-Accuracy-of-the-3rd-reprocessing-results.pdf
This document provides an overview of the Accuracy of the changes made during the 3rd Reprocessing.
Document - Technical Note
Update-on-AATSR-Visible-Channel-Long-Term-Trends.pdf
This document contains calibration guidance for the AATSR instrument.
Document - Technical Note
Envisat-product-specifications-Volume-14-RA-2-products-specifications.pdf
RA-2 Products Specifications.
Document - Technical Note
Envisats-Yaw-Axis-Drift-Investigation.pdf
This memorandum provides the results of the IDEAS+ AATSR QC team's investigation of a drift that was observed in the colocation performance of products produced by one of the instruments included in Envisat's payload, the Advanced Along-Track Scanning Radiometer (AATSR).
Document - Technical Note
AATSR-SST-Retrieval-Updated-retrieval-coefficients-based-on-ARC-project-findings.pdf
This technical note provides details on the updated retrieval coefficients for AATSR Sea Surface Temperature retrieval, following findings of the ARC project.
Document - Technical Note
AATSR-Latitude-Dependent-Bias-Correction.pdf
This document contains calibration information for the Sea Surface Temperature readings from the AATSR instrument on Envisat.
Document - Technical Note
AATSR-Third-Reprocessing-Detailed-Quality-Control-Summary.pdf
This document presents a summary of the detailed inspections performed for the spot-check quality control analysis on the AATSR data from the third reprocessing.
Document - Technical Note
Draft-specification-of-ATSR-SADIST-2-products.pdf
This document is a draft specification of the scientific products from RAL's SADIST-2 ATSR data-processing software. Since SADIST-2 is being developed such that it can process data from both ATSR-1 and ATSR-2 instruments, the products described here have been designed to be sufficiently flexible and modular that they are equally valid for either instrument.