Aeolus preliminary HLOS (horizontal line-of-sight) wind observations for Rayleigh and Mie receivers

Active Remote Sensing

ALADIN

Lidar/Laser Sounders

Profilers/Sounders

Aeolus

Atmosphere

Atmospheric Indicators

Atmospheric Winds

Climate

The Level 1B wind product of the Aeolus mission contains the preliminary HLOS (horizontal line-of-sight) wind observations for Rayleigh and Mie receivers, which are generated in Near Real Time. Standard atmospheric correction (Rayleigh channel), receiver response and bias correction is applied. The product is generated within 3 hours after data acquisition.

Aeolus Sensor and Product Description

Get Help?

Utilisation of the Aeolus products is subject to ESA's Earth Observation Terms and Conditions. Users accessing Aeolus products are intrinsically acknowledging and accepting the above.

This collection is composed of a subset of ALOS-1 PRISM (Panchromatic Remote-sensing Instrument for Stereo Mapping) OB1 L1C products from the <a href="https://earth.esa.int/eogateway/catalog/alos-prism-l1c">ALOS PRISM L1C collection</a> (DOI: 10.57780/AL1-ff3877f) which have been chosen so as to provide a cloud-free coverage over Europe. 70% of the scenes contained within the collection have a cloud cover percentage of 0%, while the remaining 30% of the scenes have a cloud cover percentage of no more than 20%.

The collection is composed of PSM_OB1_1C EO-SIP products, with the PRISM sensor operating in OB1 mode with three views (Nadir, Forward and Backward) at 35 km width.

ALOS PRISM L1C European Coverage Cloud Free

The FSSCat collection provides hyperspectral data coverage over a number of locations around the world, as measured by the HyperScout 2 sensor.

The FSSCat hyperspectral data products are comprised of 50 spectral bands, covering a spectral range of 450 – 950 nm with a spectral resolution of 18 nm (at FWHM). Imagery is available with an along-track ground sampling distance (GSD) of 75 m. To ensure a high degree of radiometric accuracy, HyperScout 2 data are validated through comparison with Sentinel-2 data products.

The processing level of the data is L1C – calibrated top-of-atmosphere radiance, reflectance or brightness temperature. The raster type of the L1C data product is a GRID – a 2D or 3D raster where the (geo)location of the data is uniquely defined by the upper left pixel location of the raster and the pixel size of the raster, and the projection parameters of the raster (if georeferenced). The third dimension can e.g. be a spectral or third spatial dimension.

The L-1C VNIR data product includes a hyperspectral cube of TOA reflectance in the VNIR range, as well as relevant meta-data that adheres to EDAP's best practice guidelines. This product consists of georeferenced and ortho-rectified image tiles that contain spectral reflectance data at the top-of-the-atmosphere. Each image tile contains radiometrically corrected and ortho-rectified band images that are projected onto a map, as well as geolocation information and the coordinate system used. Additionally, each image pixel provides TOA spectral reflectance data in scaled integers, conversion coefficients for spectral radiance units, viewing and solar zenith and azimuth angles, and quality flags.

FSSCat products

In cooperation with CONAE (Comisión Nacional de Actividades Espaciales), ESA is launching an Announcement of Opportunity for the international scientific community to access data from the SAOCOM mission for science and EO-based applications development.

Announcement of Opportunity for SAOCOM

In the framework of a Copernicus collaborative agreement ESA and EUMETSAT invite interested groups and individuals to support the Sentinel-3 Validation Team (S3VT).

Announcement of Opportunity for S3VT (Sentinel-3 Validation Team)

GEOSAT-2 Portugal coverage is a collection of 2021 data over the Portugal area, including islands. The available dataset has a cloud cover less than 10%, and is acquired up to 1m resolution with Geometric accuracy &lt;6m CE90 based on Copernicus DEM @10m.

<figure class="centered-mobile-centered"><a data-lightbox="GEOSAT-2-Portugal" data-title="GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset" href="/documents/20142/4279060/GEOSAT2_Portugal_Coverage.png"><img alt="GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset" src="/documents/20142/4279060/GEOSAT2_Portugal_Coverage_Smaller.jpg/3e2c84ea-17e7-c8b6-ed57-b079e1851142?t=1677155961453&amp;download=true" style="margin: 10px;" /></a>

<figcaption style="text-align: center;">GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset</figcaption>
</figure>

The following product types are available:

<ul>
	<li>Pan-sharpened (4 bands, 321 Natural Colours or 432 False Colours): A four-band image, resulting from adding the information of each multispectral band to the panchromatic band. The fusion does not preserves all spectral features of the multispectral bands, so it should not be used for radiometric purposes. Resolution 1m; Bands: All, R-G-B or Ni-R-G</li>
	<li>Bundle: Panchromatic (1m resolution) + Multispectral bands (4m resolution): five-band image containing the panchromatic and multispectral products packaged together, with band co-registration.</li>
</ul>

The available processing level is L1C orthorectified: a calibrated and radiometrically corrected product, manually orthorectified and resampled to a map grid.

<table class="eogtable">
	<tbody>
		<tr class="eogtable-heading">
			<td rowspan="2">Product Type</td>
			<td colspan="2">Processing Level and Spatial Resolution</td>
		</tr>
		<tr class="eogtable-heading">
			<td>L1B (native)</td>
			<td>L1C (ortho)</td>
		</tr>
		<tr>
			<td>Pan-sharpened</td>
			<td>1.0m</td>
			<td>1.0m</td>
		</tr>
		<tr>
			<td>Bundle (PAN+MS)</td>
			<td>1.0m (P), 4.0m (MS)</td>
			<td>1.0m (P), 4.0m(MS)</td>
		</tr>
	</tbody>
</table>

GEOSAT-2 Portugal Coverage 2021

Earth Observation Satellite

TOPEX/POSEIDON

JPSS-2

JPSS-3

JPSS-4

Swarm-B

Swarm-A

Swarm-C

FY-3B

Nimbus-4

CloudSat

CALIPSO

GOSAT-2

GOSAT-1

NOAA-20

TIROS

TIROS-N

GMS-5

GRACE SCA

GRACE LRR

PRARE

Spectrometers

Interferometric Radiometers

Interferometers

GRACE INTERFEROMETER

GRACE ACC

HRPAN

SAPHIR

ATMS

TRSR

SSTI

GNSS

admin admin

A tenth of Earth’s land surface is permanently occupied by ice sheets or glaciers, but the domain of the cryosphere – that part of the world where snow and ice can form – extends three times further still. The cryosphere is an important regulator of global climate, its bright albedo reflecting sunlight back to space and its presence influencing regional weather and global ocean currents. Some 77% of the globes freshwater are bound up within the ice – but the cryosphere appears disproportionately sensitive to the effects of global warming.

Imaging radar systems like those of ERS and Envisat pierce through clouds or seasonal darkness to chart ice extent, possessing sensitivity to different ice types – from kilometres - thick ice sheets to new-born floating ‘pancake’ ice – supplemented by optical observations. Radar altimeters gather data on changing ice height and mass: in 2009 ESA launched CryoSat as the first altimetry mission specifically designed to accurately measure the thickness of sea ice and land ice margins.

Cryosphere

Thematic area

There are three processes by which glaciation affects the landscape - erosion, transportation and deposition. Meanwhile, freeze-thaw describes the action of glacial meltwater on joints, cracks and hollows in rock. When the temperature reaches freezing point, the water inside cracks freezes, expands and causes the cracks to widen. When the temperature rises, the water thaws and contracts and this eventually causes rocks to break up. An ice sheet is a mass of glacial land ice extending more than 50,000 square kilometres. Two ice sheets on Earth, between them containing 99% of fresh water on Earth, cover most of Greenland and Antarctica.

Glaciers and Ice Sheets

Sea ice is ocean water that freezes - to the sea floor (fast ice), floating on the surface (drift ice) or packed together (pack ice). Because of vast amounts of water added to or removed from the oceans and atmosphere, the behaviour of polar ice packs have a significant impact of the global changes in climate.

Sea Ice

Snow and ice are features of some of the most inaccessible parts of the world. While 10% of Earth’s land surface is permanently occupied by ice sheets or glaciers, the cryosphere – where snow and ice can form – extends three times further. The cryosphere is an important regulator of global climate, its bright albedo reflecting sunlight back to space and its presence influencing regional weather and global ocean currents. The cryosphere appears disproportionately sensitive to the effects of global warming. Monitoring the environmental conditions of the polar regions includes the study of animal migration, ice mass balance, fresh water ice, snowpack conditions and monitoring of icebergs.

Snow and Ice

Permafrost, or permanently frozen ground, is soil, sediment, or rock that remains at or below 0°C for at least two years. The enormous permafrost areas of the world show seasonal change which has impact on not only vegetation and hydrological cycles, but also on the planning and safety of huge gas and oil pipelines which traverse these areas. Frozen ground data are critical to understanding environmental change, validating models, and building and maintaining structures in seasonal frost and permafrost regions.

Frozen Ground and Permafrost

Earth’s land surface represents the most varied terrain in the whole of the Solar System, gradually transformed by geological motion, atmospheric weathering and sustained biological activity. Its evolution continues to this day, helped along by humanity: deserts expand, forests are cleared and cities grow. Satellite instruments allow land cover to be classified on an objective global basis, and identify land cover change. They can pinpoint wilderness areas under threat from sprawling settlements, for example, or track patterns of soil erosion. And land cover classification sharpens the accuracy of climate models: pinning down the contributions of localised carbon ‘sources’ and ‘sinks’ for example, or the varied albedos of differing biomass or mineral surfaces. Other types of instruments contribute more radiometers such as Envisat’s AATSR takes the temperature of Earth’s land, while radar altimetry and synthetic aperture radar interferometry build up accurate three-dimensional maps of its surface contours.

Land Surface

Conduction and convection are the two common modes of heat transfer in Earth. Conduction arises from interactions between neighbouring atoms, whereas convection transports heat by fluid movement resulting from the interaction between gravity and thermally induced density changes.

Surface Radiative Properties

Earth’s centre is a dense metallic sphere with a solid inner part and a liquid outer part, mainly of iron and nickel. Surrounding the core is a mantle of iron-rich silicates containing sonic metallic iron – around the mantle is the crust. Even in the Himalayas, the crust represents less than 1 percent of the Earth's radius. Our immediate contact is with the uppermost layer of crust: oceans, mountains and sedimentary systems. Radioactive decay in the crust and mantle produces about 80 percent of the heat flowing to Earth's surface; the remainder is from cooling of the core.

Surface Thermal Properties

Remote-sensing techniques can be used to carry out landscape assessments to assess large areas for archaeological potential, including environments where it is not feasible to deploy topographic or geophysical surveys. LiDAR (Light Detection and Ranging) is an excellent way of capturing surface data over entire landscapes. This technique can penetrate vegetation cover to record the ground surface.

Landscape

In Earth science, erosion is the action of surface processes (such as water flow or wind) that removes soil, rock, or dissolved material from one location on the Earth's crust, and then transports it to another location.

Erosion and Sedimentation

Geomorphology is the study of landforms - Earth has many varieties of landforms. How landforms are different from one another is fundamental to geomorphology, which lies at the interface between geology and many other disciplines working to understand surface processes. The applications of geomorphic knowledge can range from engineering projects dealing with the physical properties of landforms to geological studies of the record of past climate change.

Geomorphic Landforms and Processes

Soils are the dynamic skin of Earth, formed by the interaction of minerals, organic materials, organisms, water and air. Soil moisture, the water contained within soil particles, is an important player in Earth's water cycle. It is essential for plant life and influences weather and climate. Soil properties that have been measured using remote sensing approaches include mineralogy, texture, soil iron, soil moisture, soil organic carbon, soil salinity and carbonate content. In sparsely vegetated areas, successful use of space borne measurements using optical, passive and active microwave instruments has occurred.

Soils

Soil moisture, the water contained within soil particles, is an important player in Earth's water cycle. It is essential for plant life and influences weather and climate. Satellite readings of soil moisture will help scientists better understand the climate system and have potential for a wide range of applications, from advancing climate models, weather forecasts, drought monitoring and flood prediction to informing water management decisions and aiding in predictions of agricultural productivity.

Soil Moisture

Soil properties that have been measured using remote sensing approaches include mineralogy, texture, soil iron, soil moisture, soil organic carbon, soil salinity and carbonate content. In sparsely vegetated areas, successful use of space borne measurements using optical, passive and active microwave instruments has occurred.

Soil Texture

Soil properties that have been measured using remote sensing approaches include mineralogy, texture, soil iron, soil moisture, soil organic carbon, soil salinity and carbonate content.

Soil Classification

Soil constituents consisting of a wide range of organic (carbonaceous) substances, including living organisms, carbonaceous remains of organisms which once occupied the soil, and organic compounds produced by current and past metabolism in the soil.

Organic Matter

Satellite instruments allow land cover to be classified on an objective global basis, and identify land cover change. They can pinpoint wilderness areas under threat from sprawling settlements, for example, or track patterns of soil erosion.

Soil Erosion

Any measure of the carbon content of the soil, in organic fractions or inorganic fractions.

Carbon

Permafrost

Remote sensing can be used for land-cover characterisation, mapping, and monitoring from the local to the global scale. The availability and accessibility of accurate and timely land-cover data sets play an important role in many global change studies, highlighting the need for better land-use and land-cover change information at multiple scales. A synthesis of current knowledge in remote sensing of land-use and land-cover science promotes more effective use of Earth observation data and technology to assess, monitor, and manage land resources.

Land Use and Land Cover

Admin Eversis

Upcoming

Status

Current

Past

Conference

Event type

Meeting

Training

Workshop

Chris Mortimore

Sessions

Data Innovation and Science Cluster

Projects subtype

EO Science for Society

National

Space Situational Awareness

Support To Science Element

A Fast Registration request must be submitted to access these data collections. Following user authentication, access to the data are provided within two working days.

Fast Registration with approval (Restrained)

Data Access Type FedEO

Procedures requiring evaluation

Access to these data collections are provided through services external to ESA. Learn more about access conditions on the data providers’ websites.

External Data (Restrained)

A Fast Registration request must be submitted to access these data collections. Access is provided as soon as the request is submitted.

Fast Registration with immediate access (Open)

These data collections are free and open to access for anyone with an active account in ESA’s EO Sign In system.

EO Sign In Authentication (Open)

Access to these data collections is free and open to everyone.

Open access (Open)

A Project Proposal must be submitted to access these Third Party Mission data collections, describing the proposed use of the data and the team involved in the project.

Project Proposal (Restrained)

Data Service Requests must be submitted to access ERS-1/2 and Envisat (A)SAR level zero data.

Aeolus preliminary HLOS (horizontal line-of-sight) wind observations for Rayleigh and Mie receivers

How To Access Data

Description

Details

DATA SET SPECIFICATIONS

PROCESSING LEVEL

APPLICABLE TERMS & CONDITIONS

RESOURCES

newsletter

Cookies & Privacy