Showing 1 - 20 of 182 datasets matching your query.
of 10
Name
CryoSat's primary payload is the SAR/Interferometric Radar Altimeter (SIRAL) which has extended capabilities to meet the measurement requirements for ice-sheet elevation and sea-ice freeboard. CryoSat also carries three star trackers for measuring the orientation...
SeaSat ESA archive (18344) recent views
The Seasat ESA archive collection mainly covers Europe during the full life of the mission. The products are available as: Level-1 SAR Ellipsoid Geocoded Precision Image SAR Precision Image SAR Single Look Complex Image
ResourceSat-1/IRS-P6 archive (8932) recent views
ResourceSat-1/IRS-P6 archive products are available as: Sensor Type Resolution (m) Coverage (km x km) System or radiometrically corrected Ortho corrected (DN) Acquisition in...
The JSA_SLC_1P product is comparable to the ESA SLC/IMS images generated for Envisat ASAR and ERS SAR instruments. It is a slant-range projected complex image in zero-Doppler SAR coordinates. The data is sampled in natural units of time in range and along track,...
ResourceSat-2 archive and tasking products are available as: Sensor Type Resolution (m) Coverage (km x km) System or radiometrically corrected Ortho corrected (DN) Ortho...
The RapidEye constellation consists of five optical Earth Observation satellites with a swath width of 77 km wide at nadir and a ground resolution of 6.5 metres. RapidEye's sensors produce imagery in five spectral bands: Blue (440-510 nm), Green (520-590 nm), Red...
The SAR SLC product is a single look complex acquired in Image Mode. It is a digital image, with slant range and phase preserved, generated from raw SAR data using up-to-date auxiliary parameters. The products are intended for use in SAR quality assessment, calibration...
The SAR Precision product is a multi-look (speckle-reduced), ground range image acquired in Image Mode. This product type is most applicable to users interested in remote sensing applications, but is also suitable for calibration purposes. The products are calibrated...
This SAR Level 0 product is acquired in Image Mode. The products consist of the SAR telemetry data and are supplied as full Level 0 segments, unprocessed. It also contains all the required auxiliary data necessary for data processing. The product serves two main...
This data product represents a single-look, complex, slant-range, digital image generated from Level 0 ASAR data collected when the instrument is in image mode. Seven possible swaths in HH or VV polarisation are available. The product is primarily intended for use...
This is a multi-look, ground range, digital image generated from Level 0 data collected when the instrument is in Image Mode (7 possible swaths HH or VV polarisation). The product includes slant range to ground range correction. It is for users wishing to perform...
This product is a complex, slant-range, digital image generated from Level 0 data collected when the instrument is in Alternating Polarisation mode. (7 possible swaths). It contains two CO-registered images corresponding to one of the three polarisation combination...
The WS Mode Level 0 product consists of time-ordered AISPs collected while the instrument is in WS Mode. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate, wide swath (ScanSAR) mode so data is only acquired for partial...
This data product is generated from Level 0 data collected when the instrument is in Alternating Polarisation Mode (7 possible swaths). The product contains two CO-registered images corresponding to one of the three polarisation combination submodes (HH and VV, HH...
CHRIS stands for Compact High Resolution Imaging Spectrometer. It was launched aboard ESA's Proba-1 satellite on 22 October 2001 and provides hyperspectral images to a resolution of 18m. The Proba-1 mission objectives are primarily for in-orbit demonstration and...
This data product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a...
The JSA_PRI_1P product is comparable to the ESA PRI/IMP images generated for Envisat ASAR and ERS SAR instruments. It is a ground range projected detected image in zero-Doppler SAR coordinates, with a 12.5 metre pixel spacing. It has four overlapping looks in Doppler...
The ASAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated...
The Level-1B data product offered by ESA from the ASAR Wide-Swath Mode (WSM) is the multi-look detected product (ASA_WSM_1P), intended to support applications that exploit intensity data. In order to support the development of new applications with the ASAR ScanSAR...
This product contains time-ordered AISP corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Showing 1 - 20 of 182 datasets matching your query.
of 10