Name
This product provides a dataset colocating backscatter and wind measurements from SeaWinds scatterometer (L2A & L2B products from JPL/PO.DAAC), onboard QuikSCAT, together with the wind fields from the ECMWF (European Centre for Medium-range Weather Forecasting)...
Radar Imagery
ALOS PALSAR products are available as: Instrument mode Product type Processing level description JAXA processing level equivalent Fine Beam Single polarisation ...
Radar Imagery
This is the basic Level 1B Wave Mode product, including up to 400 single-look, complex, slant range, imagettes generated from Level 0 data and up to 400 imagette power spectra computed using the cross-spectra methodology. The auxiliary parameters used are the most...
Radar Imagery
SeaSat ESA archive (19378) recent views
The Seasat ESA archive collection mainly covers Europe during the full life of the mission. The products are available as: Level-1 SAR Ellipsoid Geocoded Precision Image SAR Precision Image SAR Single Look Complex Image
Radar Imagery
TerraSAR-X ESA archive (1028) recent views
The TerraSAR-X ESA archive collection is a dataset of TerraSAR-X and TanDEM-X products that ESA collected over the years with worldwide coverage. The dataset regularly grows as ESA collects new products. TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image...
Radar Imagery
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The Wide Swath Beam Mode allows imaging of wider swaths than Standard Beam Mode, but at the expense of slightly coarser spatial resolution. The...
Radar Imagery
Fine is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for the fine beam mode. The Fine Resolution Beam Mode...
Radar Imagery
Extended Low is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarization. In the Extended Low Incidence Beam Mode, a single Extended Low Incidence Beam, EL1, is provided for imaging in the incidence angle range from 10 to 23...
Radar Imagery
Standard is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for standard beam mode. Standard Beam Mode allows...
Radar Imagery
Extended High is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarisation. In the Extended High Incidence Beam Mode, six Extended High Incidence Beams, EH1 to EH6, are available for imaging in the 49 to 60 degree incidence angle...
Radar Imagery
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Wide Beam Mode provides coverage of a ground swath approximately triple the width of the Wide Swath Beam Mode swaths. Two swath...
Radar Imagery
ScanSAR Narrow is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Narrow Beam Mode provides coverage of a ground swath approximately double the width of the Wide Swath Beam Mode swaths. Two swath...
Radar Imagery
The SAR Precision product is a multi-look (speckle-reduced), ground range image acquired in Image Mode. This product type is most applicable to users interested in remote sensing applications, but is also suitable for calibration purposes. The products are calibrated...
Radar Imagery
The SAR SLC product is a single look complex acquired in Image Mode. It is a digital image, with slant range and phase preserved, generated from raw SAR data using up-to-date auxiliary parameters. The products are intended for use in SAR quality assessment, calibration...
Radar Imagery
This data product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a...
Radar Imagery
This product contains time-ordered AISP corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This is a multi-look, ground range, digital image generated from Level 0 data collected when the instrument is in Image Mode (7 possible swaths HH or VV polarisation). The product includes slant range to ground range correction. It is for users wishing to perform...
Radar Imagery
This data product represents a single-look, complex, slant-range, digital image generated from Level 0 ASAR data collected when the instrument is in image mode. Seven possible swaths in HH or VV polarisation are available. The product is primarily intended for use...
Radar Imagery
The WS Mode Level 0 product consists of time-ordered AISPs collected while the instrument is in WS Mode. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate, wide swath (ScanSAR) mode so data is only acquired for partial...
Radar Imagery