Name
The ERS data reprocessed with the ASPS facility is also available in the UWI format to maintain the compatibility with the FD (Fast Delivery) products. The ASPS UWI product is organised in frames of 500 x 500 km providing the radar backscattering sigma nought for...
Radar Imagery
TerraSAR-X ESA archive (3765) recent views
The TerraSAR-X ESA archive collection is a dataset of TerraSAR-X and TanDEM-X products that ESA collected over the years with worldwide coverage. The dataset regularly grows as ESA collects new products. TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image...
Radar Imagery
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The Wide Swath Beam Mode allows imaging of wider swaths than Standard Beam Mode, but at the expense of slightly coarser spatial resolution. The...
Radar Imagery
Fine is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for the fine beam mode. The Fine Resolution Beam Mode...
Radar Imagery
Extended Low is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarization. In the Extended Low Incidence Beam Mode, a single Extended Low Incidence Beam, EL1, is provided for imaging in the incidence angle range from 10 to 23...
Radar Imagery
Standard is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for standard beam mode. Standard Beam Mode allows...
Radar Imagery
Extended High is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarisation. In the Extended High Incidence Beam Mode, six Extended High Incidence Beams, EH1 to EH6, are available for imaging in the 49 to 60 degree incidence angle...
Radar Imagery
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Wide Beam Mode provides coverage of a ground swath approximately triple the width of the Wide Swath Beam Mode swaths. Two swath...
Radar Imagery
ScanSAR Narrow is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Narrow Beam Mode provides coverage of a ground swath approximately double the width of the Wide Swath Beam Mode swaths. Two swath...
Radar Imagery
The ASPS Level 2 products contain, for each node: the radar backscattering sigma nought for the three beams of the instrument, the four aliased wind solutions (Rank 1-4 wind vector) and the de-aliased wind vector flag, the sea-ice probability and sea-ice flag, the YAW...
Radar Imagery
This is the basic Level 1B Wave Mode product, including up to 400 single-look, complex, slant range, imagettes generated from Level 0 data and up to 400 imagette power spectra computed using the cross-spectra methodology. The auxiliary parameters used are the most...
Radar Imagery
This data product is generated from Level 0 data collected when the instrument is in Alternating Polarisation Mode (7 possible swaths). The product contains two CO-registered images corresponding to one of the three polarisation combination submodes (HH and VV, HH...
Radar Imagery
This data product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a...
Radar Imagery
This product contains time-ordered AISP corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This product is a complex, slant-range, digital image generated from Level 0 data collected when the instrument is in Alternating Polarisation mode. (7 possible swaths). It contains two CO-registered images corresponding to one of the three polarisation combination...
Radar Imagery
The ASAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated...
Radar Imagery
This is a multi-look, ground range, digital image generated from Level 0 data collected when the instrument is in Image Mode (7 possible swaths HH or VV polarisation). The product includes slant range to ground range correction. It is for users wishing to perform...
Radar Imagery
This data product represents a single-look, complex, slant-range, digital image generated from Level 0 ASAR data collected when the instrument is in image mode. Seven possible swaths in HH or VV polarisation are available. The product is primarily intended for use...
Radar Imagery
The WS Mode Level 0 product consists of time-ordered AISPs collected while the instrument is in WS Mode. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate, wide swath (ScanSAR) mode so data is only acquired for partial...
Radar Imagery