Name
StripMap HIMAGE is one of the modes in which the COSMO-SkyMed SAR can operate, right and left looking acquisition. The STRIPMAP HIMAGE main characteristics are summarised in the following table: Acquisition Mode ...
Radar Imagery
ALOS PALSAR products are available as: Instrument mode Product type Processing level description JAXA processing level equivalent Fine Beam Single polarisation ...
Radar Imagery
This data product is generated from Level 0 data collected when the instrument is in Alternating Polarisation Mode (7 possible swaths). The product contains two CO-registered images corresponding to one of the three polarisation combination submodes (HH and VV, HH...
Radar Imagery
This data product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a...
Radar Imagery
This product contains time-ordered AISP corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This product contains time-ordered AISPs corresponding to one of the three possible polarisation combinations: HH & HV, VV & VH and HH & VV, respectively). The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate,...
Radar Imagery
This product is a complex, slant-range, digital image generated from Level 0 data collected when the instrument is in Alternating Polarisation mode. (7 possible swaths). It contains two CO-registered images corresponding to one of the three polarisation combination...
Radar Imagery
The ASAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated...
Radar Imagery
This is a multi-look, ground range, digital image generated from Level 0 data collected when the instrument is in Image Mode (7 possible swaths HH or VV polarisation). The product includes slant range to ground range correction. It is for users wishing to perform...
Radar Imagery
This data product represents a single-look, complex, slant-range, digital image generated from Level 0 ASAR data collected when the instrument is in image mode. Seven possible swaths in HH or VV polarisation are available. The product is primarily intended for use...
Radar Imagery
The WS Mode Level 0 product consists of time-ordered AISPs collected while the instrument is in WS Mode. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate, wide swath (ScanSAR) mode so data is only acquired for partial...
Radar Imagery
The Level-1B data product offered by ESA from the ASAR Wide-Swath Mode (WSM) is the multi-look detected product (ASA_WSM_1P), intended to support applications that exploit intensity data. In order to support the development of new applications with the ASAR ScanSAR...
Radar Imagery
The JERS-1 Optical System (OPS) is composed of a Very Near Infrared Radiometer (VNIR) and a Short Wave Infrared Radiometer (SWIR). The instrument has 8 observable spectral bands from visible to short wave infrared. The JERS-1 OPS products are available in GeoTIFF...
Radar Imagery
The JSA_PRI_1P product is comparable to the ESA PRI/IMP images generated for Envisat ASAR and ERS SAR instruments. It is a ground range projected detected image in zero-Doppler SAR coordinates, with a 12.5 metre pixel spacing. It has four overlapping looks in Doppler...
Radar Imagery
The JSA_SLC_1P product is comparable to the ESA SLC/IMS images generated for Envisat ASAR and ERS SAR instruments. It is a slant-range projected complex image in zero-Doppler SAR coordinates. The data is sampled in natural units of time in range and along track,...
Radar Imagery
This SAR Level 0 product is acquired in Image Mode. The products consist of the SAR telemetry data and are supplied as full Level 0 segments, unprocessed. It also contains all the required auxiliary data necessary for data processing. The product serves two main...
Radar Imagery
The SAR Precision product is a multi-look (speckle-reduced), ground range image acquired in Image Mode. This product type is most applicable to users interested in remote sensing applications, but is also suitable for calibration purposes. The products are calibrated...
Radar Imagery
The SAR SLC product is a single look complex acquired in Image Mode. It is a digital image, with slant range and phase preserved, generated from raw SAR data using up-to-date auxiliary parameters. The products are intended for use in SAR quality assessment, calibration...
Radar Imagery
This ERS stripline product is generated from the Image Mode Level 0 Product. Stripline image products contain image data for an entire segment, up to a maximum size of 10 minutes per product for IM mode. The processor concatenates together several sub-images called...
Radar Imagery
SeaSat ESA archive (20407) recent views
The Seasat ESA archive collection mainly covers Europe during the full life of the mission. The products are available as: Level-1 SAR Ellipsoid Geocoded Precision Image SAR Precision Image SAR Single Look Complex Image
Radar Imagery