Name
This is a RA Geophysical Data Record (GDR) product containing radar range, orbital altitude, wind speed, wave height and water vapour from the ATSR/MWR as well as geophysical corrections. The REAPER (REprocessing of Altimeter Products for ERS) product is generated...
This is a RA Sensor Geophysical Data Record (SDGR) product containing all of the parameters found in the REAPER GDR product ( ERS_ALT_2_ ) with the addition of the echo waveform and selected parameters from the Level 1b data. The REAPER (REprocessing of Altimeter...
This is a RA Meteo product containing only the 1 Hz parameters for altimeter (surface range, satellite altitude, wind speed and significant wave height at nadir) and ATSR/MWR data (brightness temperature at 23.8 GHz and 36.5 GHz, water vapour content, liquid water...
The recommended ATSR Level 3 products for Sea Surface Temperature (SST) applications are the ARC (ATSR Re-processing for Climate) Level 3 products. ARC reprocesses the ATSR multi-mission archive using new cloud detection and SST retrievals to produce a homogenous...
The recommended AATSR Level 3 products for Sea Surface Temperature (SST) applications are the ARC (ATSR Re-processing for Climate) Level 3 products. ARC reprocesses the ATSR multi-mission archive using new cloud detection and SST retrievals to produce a homogenous...
The OMI observations provide the following capabilities and features: A mapping of ozone columns at 13 km x 24 km and profiles at 13 km x 48 km A measurement of key air quality components: NO2, SO2, BrO, HCHO, and aerosol The ability to distinguish...
SPOTMaps 2.5 is a dataset providing nationwide or regional seamless coverage, orthorectified, derived from colour imagery acquired by SPOT 5. It is available over more than 110 countries, representing a total of more than 95 million km 2 . The dataset has a...
The SPOT-1 to 4 satellites were the 1st generation of SPOT satellites. While SPOT-1 to 3 provided optical acquisitions from the same HRV (High Resolution Visible) sensor, SPOT-4 provided optical acquisitions from an improved HRVIR (High Resolution Visible InfraRed)...
SPOT-5 was the fifth satellite in the SPOT series of CNES, introducing the new generation HRG (High Resolution Geometric) and HRS (High Resolution Stereoscopic) sensors. Thanks to the same imaging characteristics, SPOT-5 ensured service continuity consistent with...
SPOT-6 and 7 ensure the data continuity with the no longer operational SPOT-5 satellite. SPOT-6 (launched 2012) and SPOT-7 (launched 2014) provide an archive of very high resolution optical acquisition as well as the possibility to task the satellites for new...
In analogy to the previous SPOT-4 Take-5 experiment, on 2 May 2015, SPOT-5 was placed in a 5 days cycle orbit. Thanks to this orbit, SPOT-5 now acquires data over 150 selected sites every 5 days under constant angles. These Sentinel-2 type time series are made...
TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the...
TerraSAR-X image products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the requirements of...
TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the...
TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the...
TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the...
TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image modes with flexible resolutions (from 0.25m to 40m) and scene sizes. Thanks to different polarimetric combinations and processing levels the delivered imagery can be tailored specifically to meet the...
The recommended AATSR Level 3 products for Land Surface Temperature (LST) applications are the Level 3 products that have been produced by the University of Leicester (UOL). These Level 3 products have been generated from Level 2 UOL LST products which use the same...
The Proba-V VEGETATION Raw products (L1C/P) and synthesis products (S1 = daily, S5 = 5 days, S10 = decade) ensure coverage of all significant landmasses worldwide with, in the case of a 10-day synthesis product, a minimum effect of cloud cover, resulting from selection...
This dataset contains all the Landsat 5 Thematic Mapper high-quality ortho-rectified L1T dataset acquired by ESA: Kiruna Landsat TM GTC density map Maspalomas Landsat TM GTC density map ...