Name
The Pléiades twins are very high-resolution satellites delivering 50-cm Ortho products as a standard. The telescope is a Korsch type combination with 65cm aperture diameter, focal length of 12.905m, f/20, TMA optics, delivering a 20km swath at Nadir. It works on...
ResourceSat-1/IRS-P6 archive products are available as: Sensor Type Resolution (m) Coverage (km x km) System or radiometrically corrected Ortho corrected (DN) Acquisition in...
ResourceSat-2 archive and tasking products are available as: Sensor Type Resolution (m) Coverage (km x km) System or radiometrically corrected Ortho corrected (DN) Ortho...
TerraSAR-X ESA archive (2546) recent views
The TerraSAR-X ESA archive collection is a dataset of TerraSAR-X and TanDEM-X products that ESA collected over the years with worldwide coverage. The dataset regularly grows as ESA collects new products. TerraSAR-X/TanDEM-X Image Products can be acquired in 6 image...
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The Wide Swath Beam Mode allows imaging of wider swaths than Standard Beam Mode, but at the expense of slightly coarser spatial resolution. The...
Fine is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for the fine beam mode. The Fine Resolution Beam Mode...
Extended Low is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarization. In the Extended Low Incidence Beam Mode, a single Extended Low Incidence Beam, EL1, is provided for imaging in the incidence angle range from 10 to 23...
Standard is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for standard beam mode. Standard Beam Mode allows...
Extended High is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarisation. In the Extended High Incidence Beam Mode, six Extended High Incidence Beams, EH1 to EH6, are available for imaging in the 49 to 60 degree incidence angle...
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Wide Beam Mode provides coverage of a ground swath approximately triple the width of the Wide Swath Beam Mode swaths. Two swath...
ScanSAR Narrow is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation. The ScanSAR Narrow Beam Mode provides coverage of a ground swath approximately double the width of the Wide Swath Beam Mode swaths. Two swath...
Euro-Maps 3D is a homogeneous, 5 m spaced digital surface model (DSM) semi-automatically derived from 2.5 m in-flight stereo data provided by IRS-P5 CartoSat-1 and developed in cooperation with the German Aerospace Center, DLR. The very detailed and accurate...
CartoSat-1 archive (6418) recent views
CartoSat-1 archive products are availableas Sensor Type Resolution (m) Coverage (km x km) System or radiometrically corrected Ortho corrected (DN) ...
This product was generated by the Centre de Traitement Doris Poseidon (CTDP). It is used to obtain the satellite orbital parameters (lat, long, height and height rate) by using orbit computation routines. The Envisat Precise Orbits products (POE or DOR_VOR_AX)...
The precise orbit results from a data reduction process in which all available tracking data (Single-Lens Reflex, radar altimeter crossovers, PRARE range and Doppler data) and most accurate correction, transformation and dynamical models are taken into account and in...
Deimos-1 full archive and new tasking products are available at 22m resolution in 2 processing levels: Deimos-1 products Product Description (um) L1R: Basic Geopositioned ...
Deimos-2 full archive and new tasking products are available at up to 0.75m resolution as: Deimos-2 products Product Description (um) Pan-sharpened 4 bands A four-band...
Surface soil moisture records are derived from the backscatter coefficient σ0 measured by the Scatterometer on-board the European Remote Sensing satellite (ERS-2) using the Technische Universität (TU) Wien soil moisture retrieval algorithm called WARP (WAter Retrieval...
The ERS data reprocessed with the ASPS facility is also available in the UWI format to maintain the compatibility with the FD (Fast Delivery) products. The ASPS UWI product is organised in frames of 500 x 500 km providing the radar backscattering sigma nought for...
WorldView-2 products are available as part of the DigitalGlobe Standard Satellite Imagery products from the QuickBird, WorldView-1/-2/-3, and GeoEye-1 satellites. The full QuickBird, WorldView-1/-2/-3, and GeoEye-1 constellation provides the following products: ...