| Name |
|---|
|
ScanSAR Narrow is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation.
The ScanSAR Narrow Beam Mode provides coverage of a ground swath approximately double the width of the Wide Swath Beam Mode swaths. Two swath...
|
|
Extended High is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarisation.
In the Extended High Incidence Beam Mode, six Extended High Incidence Beams, EH1 to EH6, are available for imaging in the 49 to 60 degree incidence angle...
|
|
Standard is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for standard beam mode.
Standard Beam Mode allows...
|
|
Fine is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate. But while RADARSAT-2 can operate in single and dual polarisation for this beam mode, RADARSAT-1 operates only in single polarisation for the fine beam mode.
The Fine Resolution Beam Mode...
|
|
Extended Low is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single polarization.
In the Extended Low Incidence Beam Mode, a single Extended Low Incidence Beam, EL1, is provided for imaging in the incidence angle range from 10 to 23...
|
|
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation.
The Wide Swath Beam Mode allows imaging of wider swaths than Standard Beam Mode, but at the expense of slightly coarser spatial resolution. The...
|
|
ScanSAR Wide is one of the beam modes in which the RADARSAT-1 & 2 SAR can operate, single and dual polarisation.
The ScanSAR Wide Beam Mode provides coverage of a ground swath approximately triple the width of the Wide Swath Beam Mode swaths. Two swath...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-ACCDAT, GB-OG-1B-ACCDAT) (GRACE ACCDAT)
(401) recent views
Preprocessed and calibrated Level-1B accelerometer data edited and decimated from instrument high-rate (0.1 s) to low-rate (1s) samples for science use (1 file per day, level-1 format).
GRACE Level-1A Data Products are the result of a non-destructive processing...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-ACCHKP, GB-OG-1B-ACCHKP) (GRACE ACCHKP)
(406) recent views
Accelerometer proof-mass bias voltages, capacitive sensor outputs, instrument control unit (ICU) and sensor unit (SU) temperatures, reference voltages, primary and secondary power supply voltages (1 file per day, level-1 format).
GRACE Level-1A Data Products are...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-USODAT, GB-OG-1B-USODAT) (GRACE USODAT)
(425) recent views
Oscillator frequency data derived from POD product.
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the binary encoded measurements...
|
|
GRACE Atmosphere and Ocean De-aliasing Product.
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the binary encoded measurements to...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-TNKDAT, GB-OG-1B-TNKDAT) (GRACE TNKDAT)
(388) recent views
GN2 tank temperature and pressure data.
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the binary encoded measurements to...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-CLKDAT, GB-OG-1B-CLKDAT) (GRACE CLKDAT)
(450) recent views
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the binary encoded measurements to engineering units. Where necessary, time tag integer...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-THRDAT, GB-OG-1B-THRDAT) (GRACE THRDAT)
(369) recent views
GN2 thruster data used for attitude (10 mN) and orbit (40 mN) control.
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the binary...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-SCAATT, GB-OG-1B-SCAATT) (GRACE SCAATT)
(369) recent views
Preprocessed and calibrated star camera quaternion data edited and decimated from instrument high-rate (1 s) to low-rate (5 s) samples for science use (1 file per day, level-1 format).
GRACE Level-1A Data Products are the result of a non-destructive processing...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-OBDHTM, GB-OG-1B-OBDHTM) (GRACE OBDHTM)
(469) recent views
On-board data handling (OBDH) time mapping data (OBDH time to receiver time).
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at NASA/JPL. The sensor calibration factors are applied in order to convert the...
|
|
Non-tidal ocean spherical harmonic coefficients provided as average over certain time span (same as corresponding GSM product) based on level-1 AOD1B product (1file per time span, level-2 format)
GRACE Level-1A Data Products are the result of a non-destructive...
|
|
GRACE-A and GRACE-B Level-1B Data Product (GA-OG-1B-NAVSOL, GB-OG-1B-NAVSOL) (GRACE NAVSOL)
(419) recent views
GPS navigation data edited and decimated from instrument high-rate (60 s) to low-rate (30 s) samples for science use (1 file per day, level-1 format).
GRACE Level-1A Data Products are the result of a non-destructive processing applied to the Level-0 data at...
|
|
Non-tidal atmosphere plus ocean spherical harmonic coefficients provided as average over certain time span (same as corresponding GSM product) based on level-1 AOD1B product (1file per time span, level-2 format)
GRACE Level-1A Data Products are the result of a...
|
