\ SCIAMACHY Daily Report --- ---

1. SCIAMACHY Daily Report for level 1 products


  1.1. General Info
  1.2 Product Quality Indicators
  1.3 ADF monitoring
  1.4 DMOP execution monitoring

1.1 General Info

This report contains a daily analysis on parameters extracted from SCIAMACHY level 1 data (The SCI_NL__1P product).

1.1.1 Report summary

The table below shows general characteristics of the data that are included into this report.
Item Value
Report version
1.5 (28-07-2008)
Time of report generation
28JAN2012 02:12:27
Data source version
SCIA/7.04-N
Processing scope for products
23JAN2012 00:00:00 to 24JAN2012 00:00:00
Start time of first product within scope
23JAN2012 00:03:36
Stop time of last product within scope
23JAN2012 06:39:34
Total number of level 1 products
5
Number of level 1 products with errors
0

1.1.2 Summary per product

The following table shows a summary for each product used in this report.

# Product name Start time Stop time ProdErr #nadir #limb #occ #mon #noproc #cmpl_drk #incmpl_drk Decont
0
SCI_NL__1PNPDE20120123_000336_000057023111_00030_51768_2786.N1
23JAN2012 00:03:36
23JAN2012 01:38:39
0
35
46
1
0
1
15
0
nnnnnnnn
1
SCI_NL__1PNPDE20120123_014350_000040143111_00031_51769_2810.N1
23JAN2012 01:43:50
23JAN2012 02:50:45
0
16
38
1
0
2
15
0
nnnnnnnn
2
SCI_NL__1PNPDE20120123_025000_000061843111_00032_51770_2849.N1
23JAN2012 02:50:00
23JAN2012 04:33:04
0
36
46
1
0
3
15
0
nnnnnnnn
3
SCI_NL__1PNPDE20120123_043216_000061083111_00033_51771_2885.N1
23JAN2012 04:32:16
23JAN2012 06:14:05
0
36
45
1
0
3
15
0
nnnnnnnn
4
SCI_NL__1PNPDK20120123_061230_000016243111_00034_51772_8314.N1
23JAN2012 06:12:30
23JAN2012 06:39:34
0
18
6
0
0
1
0
0
nnnnnnnn

1.2 Product Quality Indicators

This section shows information about product quality, in particular the quality of retrieved species.

The following data items are currently included into this section:

  1. Polarisation check (if available)
  2. Leakage FPN measurements (if available)
  3. Dark measurements (if available)
  4. New leakage current parameters (if available)
  5. New spectral calibration parameters (if available)
  6. New sun reference spectrum (if available)
  7. New PPG/Etalon parameters (if available)

1.2.1 Polarisation check

The following table summarizes measured polarisation fractions for each of the detectors in nadir and limb mode. Note: this section is currently in a testing phase.

PMD ID #Q=0 #U=0
NADIR PMD1
0 out of 108576 (0.00000 %)
0 out of 108576 (0.00000 %)
NADIR PMD2
68339 out of 108576 (62.9412 %)
69640 out of 108576 (64.1394 %)
NADIR PMD3
31889 out of 108576 (29.3702 %)
32923 out of 108576 (30.3225 %)
NADIR PMD4
13783 out of 108576 (12.6943 %)
15639 out of 108576 (14.4037 %)
NADIR PMD5
49684 out of 108576 (45.7597 %)
51084 out of 108576 (47.0491 %)
NADIR PMD6
99360 out of 108576 (91.5119 %)
100209 out of 108576 (92.2939 %)
NADIR OVERLAP1
93684 out of 108576 (86.2843 %)
94923 out of 108576 (87.4254 %)
NADIR OVERLAP2
67432 out of 108576 (62.1058 %)
79092 out of 108576 (72.8448 %)
NADIR OVERLAP3
98914 out of 108576 (91.1012 %)
101048 out of 108576 (93.0666 %)
NADIR OVERLAP4
99564 out of 108576 (91.6998 %)
99837 out of 108576 (91.9513 %)
NADIR OVERLAP5
99487 out of 108576 (91.6289 %)
99796 out of 108576 (91.9135 %)
NADIR MODEL300NM
67408 out of 108576 (62.0837 %)
69382 out of 108576 (63.9018 %)
LIMB PMD1
0 out of 29490 (0.00000 %)
0 out of 29490 (0.00000 %)
LIMB PMD2
8624 out of 29490 (29.2438 %)
9116 out of 29490 (30.9122 %)
LIMB PMD3
5670 out of 29490 (19.2269 %)
6728 out of 29490 (22.8145 %)
LIMB PMD4
5503 out of 29490 (18.6606 %)
6955 out of 29490 (23.5843 %)
LIMB PMD5
5547 out of 29490 (18.8098 %)
6875 out of 29490 (23.3130 %)
LIMB PMD6
4440 out of 29490 (15.0560 %)
13281 out of 29490 (45.0356 %)
LIMB OVERLAP1
12634 out of 29490 (42.8416 %)
20737 out of 29490 (70.3188 %)
LIMB OVERLAP2
20312 out of 29490 (68.8776 %)
22286 out of 29490 (75.5714 %)
LIMB OVERLAP3
8886 out of 29490 (30.1322 %)
14972 out of 29490 (50.7698 %)
LIMB OVERLAP4
7116 out of 29490 (24.1302 %)
10186 out of 29490 (34.5405 %)
LIMB OVERLAP5
5967 out of 29490 (20.2340 %)
11895 out of 29490 (40.3357 %)
LIMB MODEL300NM
6623 out of 29490 (22.4585 %)
16840 out of 29490 (57.1041 %)

1.2.2 Fixed pattern noise information from SCI_LK1_AX files in product references

The following plots show ratios of fixed pattern noise of SCI_LK1_AX files that are referred to by the products listed in Section 1.1.2. Note: this section is currently in a testing phase.

qds_image

qds_image

1.2.3 Dark measurements overview

This section lists properties of the dark measurements performed within the processing scope.

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_2.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_3.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_4.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_5.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_6.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_7.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_8.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_9.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_10.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_11.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_12.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_13.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_14.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_15.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_16.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_17.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_18.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_19.PNG

1.2.4 New leakage current parameters

This section lists properties of the new leakage current data within the processing scope.

The following table shows the new leakage measurement data characteristics.

Note: Since the introduction of the SCICAL calibration data processor, the new leakage current dataset is not directly used for Auxiliary Data File generation.

# dsr_time attach orb_phase
0
23JAN2012 00:19:20
1
0.289500
1
23JAN2012 01:54:38
1
0.240500
2
23JAN2012 02:02:30
1
0.323400
3
23JAN2012 03:39:47
1
0.289500
4
23JAN2012 05:15:05
1
0.240500
5
23JAN2012 05:22:58
1
0.323400

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_20.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_21.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_22.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_23.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_24.PNG

1.2.5 Spectral calibration parameters

(No new spectral calibration data available for this processing scope)

1.2.6 Sun reference spectrum parameters

This section lists properties of the new sun reference spectrum data within the processing scope.

The following table shows the new sun reference measurement data characteristics.

Note: Since the introduction of the SCICAL calibration data processor, the new sun reference spectrum dataset is not directly used for Auxiliary Data File generation.

# dsr_time attach ID NDF az [deg] el [deg] solar_el [deg] Doppler 500nm [nm]
0
23JAN2012 00:32:02
0
0
O
U
1
1
-27.5767
-27.5767
-11.7171
-11.7171
0.00000
0.00000
0.00948091
0.00948091
1
23JAN2012 02:12:15
0
0
O
U
1
1
-27.5746
-27.5746
-11.7182
-11.7182
0.00000
0.00000
0.00948005
0.00948005
2
23JAN2012 03:52:29
0
0
O
U
1
1
-27.5726
-27.5726
-11.7183
-11.7183
0.00000
0.00000
0.00947959
0.00947959
3
23JAN2012 05:32:43
0
0
O
U
1
1
-27.5707
-27.5707
-11.7176
-11.7176
0.00000
0.00000
0.00947935
0.00947935

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_25.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_26.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_27.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_28.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_29.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_30.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_31.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_32.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_33.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_34.PNG

1.2.7 PPG and Etalon parameters

(No PPG and Etalon data available for this processing scope)

1.3 ADF monitoring

This section shows the (variation in) ADFs used for each of the products. It consists of:
Number ADF name
0
SCI_LK1_AXVIEC20120126_163357_20120123_014350_20120323_024959
1
SCI_LK1_AXVIEC20120126_163248_20120123_024959_20120323_043216
2
SCI_LK1_AXVIEC20120126_163330_20120123_043216_20120323_061338
3
SCI_PE1_AXVIEC20120126_155205_20120123_043216_20120206_061338


Number ADF

LK1 (LEAKAGE_FILE)
0
SCI_LK1_AXVIEC20120121_055805_20120118_073826_20120318_084259

PE1 (PPG_ETALON_FILE)
1
SCI_PE1_AXVIEC20120120_151754_20120117_234711_20120201_012113

SP1 (SPECTRAL_FILE)
2
SCI_SP1_AXVIEC20120113_153015_20120108_194159_20120407_211855

SU1 (SUN_REF_FILE)
3
SCI_SU1_AXVIEC20120120_152810_20120117_191123_20120201_204807

KD1 (KEY_DATA_FILE)
4
SCI_KD1_AXNIEC20091126_123849_20020301_000000_20991231_235959

MF1 (M_FACTOR_FILE)
5
NOT USED

LI1 (INIT_FILE)
6
SCI_LI1_AXNIEC20091126_125714_20020701_000000_20991231_235959

FRO (ORBIT_FILE)
7
DOR_NAV_0PNPDE20120122_235522_000057383111_00030_51768_4725.N1
8
DOR_NAV_0PNPDE20120123_013619_000038253111_00031_51769_4726.N1
9
DOR_NAV_0PNPDE20120123_024524_000060573111_00032_51770_4727.N1
10
DOR_NAV_0PNPDE20120123_043139_000057383111_00033_51771_4728.N1
11
DOR_NAV_0PNPDK20120123_061236_000331563111_00034_51772_6747.N1

ATT (ATTITUDE_FILE)
12
NOT USED


qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_35.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_36.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_37.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_38.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_39.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_40.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_41.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_42.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_43.PNG

1.4 DMOP execution monitoring

This section gives an analysis of the DMOP execution. The execution is monitored by assigning various activities to timeline sequences found in the DMOP file, and by checking where "NEW" datasets are available in SCI_NL__1P products.

The following plot gives an overview of planned activities and actual special measurements in the Level 1 products. The planning is taken from the DMOP files, and interpreted using information from OSDF files.

qds_image

sciamachy_daily_report_level1_SCIA_7_04_N_20120123_44.PNG