\ SCIAMACHY Daily Report --- ---

1. SCIAMACHY Daily Report for level 1 products


  1.1. General Info
  1.2 Product Quality Indicators
  1.3 ADF monitoring
  1.4 DMOP execution monitoring

1.1 General Info

This report contains a daily analysis on parameters extracted from SCIAMACHY level 1 data (The SCI_NL__1P product).

1.1.1 Report summary

The table below shows general characteristics of the data that are included into this report.
Item Value
Report version
1.5 (28-07-2008)
Time of report generation
29JAN2012 02:57:08
Data source version
SCIA/7.04-W
Processing scope for products
16JAN2012 00:00:00 to 17JAN2012 00:00:00
Start time of first product within scope
15JAN2012 23:28:25
Stop time of last product within scope
16JAN2012 02:48:49
Total number of level 1 products
2
Number of level 1 products with errors
0

1.1.2 Summary per product

The following table shows a summary for each product used in this report.

Products are linked to a corresponding server directory for view/download. Note: Link access may be restricted by security settings of your internet browser or firewall.

# Product name Start time Stop time ProdErr #nadir #limb #occ #mon #noproc #cmpl_drk #incmpl_drk Decont
0
SCI_NL__1PWDPA20120115_232825_000059993110_00361_51668_6546.N1
15JAN2012 23:28:25
16JAN2012 01:08:24
0
36
43
1
0
1
17
0
nnnnnnnn
1
SCI_NL__1PWDPA20120116_010828_000060213110_00362_51669_6545.N1
16JAN2012 01:08:28
16JAN2012 02:48:49
0
35
48
1
0
1
13
0
nnnnnnnn

1.2 Product Quality Indicators

This section shows information about product quality, in particular the quality of retrieved species.

The following data items are currently included into this section:

  1. Polarisation check (if available)
  2. Leakage FPN measurements (if available)
  3. Dark measurements (if available)
  4. New leakage current parameters (if available)
  5. New spectral calibration parameters (if available)
  6. New sun reference spectrum (if available)
  7. New PPG/Etalon parameters (if available)

1.2.1 Polarisation check

The following table summarizes measured polarisation fractions for each of the detectors in nadir and limb mode. Note: this section is currently in a testing phase.

PMD ID #Q=0 #U=0
NADIR PMD1
0 out of 51597 (0.00000 %)
0 out of 51597 (0.00000 %)
NADIR PMD2
31748 out of 51597 (61.5307 %)
32449 out of 51597 (62.8893 %)
NADIR PMD3
14037 out of 51597 (27.2051 %)
14594 out of 51597 (28.2846 %)
NADIR PMD4
6064 out of 51597 (11.7526 %)
6970 out of 51597 (13.5085 %)
NADIR PMD5
22404 out of 51597 (43.4211 %)
23079 out of 51597 (44.7293 %)
NADIR PMD6
47084 out of 51597 (91.2534 %)
47522 out of 51597 (92.1023 %)
NADIR OVERLAP1
44023 out of 51597 (85.3209 %)
44585 out of 51597 (86.4101 %)
NADIR OVERLAP2
31260 out of 51597 (60.5849 %)
37595 out of 51597 (72.8628 %)
NADIR OVERLAP3
46896 out of 51597 (90.8890 %)
48027 out of 51597 (93.0810 %)
NADIR OVERLAP4
47076 out of 51597 (91.2379 %)
47203 out of 51597 (91.4840 %)
NADIR OVERLAP5
47045 out of 51597 (91.1778 %)
47225 out of 51597 (91.5266 %)
NADIR MODEL300NM
31906 out of 51597 (61.8369 %)
33091 out of 51597 (64.1336 %)
LIMB PMD1
0 out of 12079 (0.00000 %)
0 out of 12079 (0.00000 %)
LIMB PMD2
2576 out of 12079 (21.3263 %)
2728 out of 12079 (22.5847 %)
LIMB PMD3
1749 out of 12079 (14.4797 %)
2112 out of 12079 (17.4849 %)
LIMB PMD4
1708 out of 12079 (14.1402 %)
2110 out of 12079 (17.4683 %)
LIMB PMD5
1693 out of 12079 (14.0161 %)
2096 out of 12079 (17.3524 %)
LIMB PMD6
1501 out of 12079 (12.4265 %)
3669 out of 12079 (30.3750 %)
LIMB OVERLAP1
4477 out of 12079 (37.0643 %)
7635 out of 12079 (63.2089 %)
LIMB OVERLAP2
7956 out of 12079 (65.8664 %)
8709 out of 12079 (72.1003 %)
LIMB OVERLAP3
2794 out of 12079 (23.1311 %)
5119 out of 12079 (42.3793 %)
LIMB OVERLAP4
2216 out of 12079 (18.3459 %)
3157 out of 12079 (26.1363 %)
LIMB OVERLAP5
1932 out of 12079 (15.9947 %)
4060 out of 12079 (33.6121 %)
LIMB MODEL300NM
2283 out of 12079 (18.9006 %)
6259 out of 12079 (51.8172 %)

1.2.2 Fixed pattern noise information from SCI_LK1_AX files in product references

The following plots show ratios of fixed pattern noise of SCI_LK1_AX files that are referred to by the products listed in Section 1.1.2. Note: this section is currently in a testing phase.

qds_image

qds_image

1.2.3 Dark measurements overview

This section lists properties of the dark measurements performed within the processing scope.

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_2.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_3.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_4.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_5.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_6.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_7.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_8.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_9.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_10.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_11.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_12.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_13.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_14.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_15.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_16.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_17.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_18.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_19.PNG

1.2.4 New leakage current parameters

This section lists properties of the new leakage current data within the processing scope.

The following table shows the new leakage measurement data characteristics.

Note: Since the introduction of the SCICAL calibration data processor, the new leakage current dataset is not directly used for Auxiliary Data File generation.

# dsr_time attach orb_phase
0
16JAN2012 01:16:30
1
0.289000

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_20.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_21.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_22.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_23.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_24.PNG

1.2.5 Spectral calibration parameters

(No new spectral calibration data available for this processing scope)

1.2.6 Sun reference spectrum parameters

This section lists properties of the new sun reference spectrum data within the processing scope.

The following table shows the new sun reference measurement data characteristics.

Note: Since the introduction of the SCICAL calibration data processor, the new sun reference spectrum dataset is not directly used for Auxiliary Data File generation.

# dsr_time attach ID NDF az [deg] el [deg] solar_el [deg] Doppler 500nm [nm]
0
16JAN2012 01:29:20
0
0
O
U
1
1
-27.8360
-27.8360
-11.7084
-11.7084
0.00000
0.00000
0.00954102
0.00954102

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_25.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_26.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_27.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_28.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_29.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_30.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_31.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_32.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_33.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_34.PNG

1.2.7 PPG and Etalon parameters

(No PPG and Etalon data available for this processing scope)

1.3 ADF monitoring

This section shows the (variation in) ADFs used for each of the products. It consists of:
Number ADF name
0
SCI_LK1_AXVIEC20120118_152520_20120116_022652_20120316_032650
1
SCI_PE1_AXVIEC20120118_151530_20120116_022652_20120130_032650


Number ADF

LK1 (LEAKAGE_FILE)
0
SCI_LK1_AXVIEC20120118_152419_20120115_232033_20120316_005452

PE1 (PPG_ETALON_FILE)
1
SCI_PE1_AXVIEC20120118_184200_20120115_232033_20120130_005452

SP1 (SPECTRAL_FILE)
2
SCI_SP1_AXVIEC20120113_153015_20120108_194159_20120407_211855

SU1 (SUN_REF_FILE)
3
SCI_SU1_AXVIEC20120118_152720_20120115_202501_20120130_213444

KD1 (KEY_DATA_FILE)
4
SCI_KD1_AXNIEC20091126_123849_20020301_000000_20991231_235959

MF1 (M_FACTOR_FILE)
5
NOT USED

LI1 (INIT_FILE)
6
SCI_LI1_AXNIEC20091126_125714_20020701_000000_20991231_235959

FRO (ORBIT_FILE)
7
AUX_FRO_AXVPDS20120118_232113_20120115_221000_20120118_005000

ATT (ATTITUDE_FILE)
8
AUX_FRA_AXVFOS20120118_180501_20120115_000000_20120117_000000
9
AUX_FRA_AXVFOS20120119_180501_20120116_000000_20120118_000000


qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_35.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_36.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_37.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_38.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_39.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_40.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_41.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_42.PNG

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_43.PNG

1.4 DMOP execution monitoring

This section gives an analysis of the DMOP execution. The execution is monitored by assigning various activities to timeline sequences found in the DMOP file, and by checking where "NEW" datasets are available in SCI_NL__1P products.

The following plot gives an overview of planned activities and actual special measurements in the Level 1 products. The planning is taken from the DMOP files, and interpreted using information from OSDF files.

qds_image

sciamachy_daily_report_level1_SCIA_7_04_W_20120116_44.PNG