The goal of SAR calibration and validation activities was to verify the accuracy and quality of data the instrument acquired. Details are available of the ERS-2 SAR Cal/Val plan and of Calibration Activities.
Explore SAR (ERS-2)
About SAR (ERS-2)
The ERS-2 satellite, launched on 21 April 1995, carried a Synthetic Aperture Radar (SAR). This provided continuity for the ERS-1 mission, which also carried a SAR instrument.
As with ERS-1, the ERS-2 SAR operated in parallel with another instrument – the Wind Scatterometer (WS). Together the SAR/WS configuration was called the Active Microwave Instrument (AMI). AMI had three modes of operation, which allowed the instruments to image land during day or night or through clouds.
The last ERS-2 SAR data were acquired on 4 July 2011 and the ERS-2 mission itself ended on 5 September 2011.
SAR (ERS-2) Data
Download data from the ERS-2 SAR mission through the ESA Online Dissemination System. The data is freely available to registered users.
All ERS-2 SAR products, in accordance with ESA Earth Observation Data Policy, are freely available to users. Read more about the available SAR products:
- ERS-1/2 - SAR Level 1 Medium Resolution Image Product
- ERS-1/2 - SAR Level 1 Precision Image Product
- ERS-1/2 - SAR Level 1 Single Look Complex Image Product
- ERS-1/2 - SAR Raw Image Product
RAW, IMP and SLC data are provided in CEOS format produced using the ESA PGS-ERS processor. All products can be provided in an Envisat product format, provided by the ESA PF-ASAR processor.
Tools available for visualising, processing and analysing ERS-2 data:
Sentinel-1 Toolbox (S1TBX) consists of a collection of processing tools, data product readers and writers and a display and analysis application to support the large archive of data from ESA SAR missions including Sentinel-1, ERS-1 & 2 and Envisat.
Sentinel Application Platform
Sentinel Application Platform (SNAP) is a common architecture for all Sentinel Toolboxes. It is ideal for Earth Observation processing and analysis due to technological innovations.
Auxiliary data from ground or airborne sources is sometimes used to help produce data products. Auxiliary data files for SAR data products are available to download.
SAR (ERS-2) Cal/Val
SAR (ERS-2) Quality Control Reports
Quality Control is monitoring routinely the status of the spacecraft (payload and platform) and to check if the derived products meet the quality requirements along mission life-time. SAR Quality Control Reports are available for Product Anomalies, Quality Control Products Parameter Plots, Cyclic Reports, Taw Weekly Reports and AMI Telemetry Data