AATSR processing uses the following instrument-specific ADFs:
•	Browse Product Lookup Data						(ATS_BRW_AX)
•	L1B Characterisation Data						(ATS_CH1_AX)
•	Cloud Lookup Table Data							(ATS_CL1_AX)
•	General Calibration Data						(ATS_GC1_AX)
•	AATSR Instrument Data							(ATS_INS_AX)
•	Visible Calibration Coefficients Data				(ATS_VC1_AX)
•	L1B Processing Configuration Data					(ATS_PC1_AX)
•	L2 Processing Configuration Data					(ATS_PC2_AX)
•	SST Retrieval Coefficients Data					(ATS_SST_AX)
•	LST Land Surface Temperature Coefficients Data			(ATS_LST_AX)

Note that because the PC1 file contains the orbit period, two versions were maintained following the execution of the mission extension orbit manoeuvres in October 2010 (Envisat 2010+).

AATSR processing also uses the following generic Envisat ADFs:
•	Land/Sea Mask Data			(AUX_LSM_AX)
•	Digital Elevation Data			(AUX_DEM_AX)
•	Orbit State Vector Data			(various, see below)

Several datasets were available for use as the Orbit State Vector (OSV) data, with the DOR_VOR dataset being preferentially selected:
•	DORIS Precise Orbit State Vectors (Version D)		(DOR_VOR)
•	Envisat Restituted Orbit State Vectors			(AUX_FRO)
•	Envisat Predicted Orbit State Vectors			(AUX_FPO)

Table 1 presents the processor version and static auxiliary data files that were used in the AATSR reprocessing.

----------------------------------------------------------------------
Table 1. Processor version and static ADFs used in AATSR reprocessing
----------------------------------------------------------------------
UPDATED ITEMS:
==============
IPF Processor 	6.05
SST ADF		ATS_SST_AXVIEC20120615_110212_20020301_000000_20200101_000000
CH1 ADF		ATS_CH1_AXVIEC20120615_105541_20020301_000000_20200101_000000
CL1 ADF		ATS_CL1_AXVIEC20120618_144125_20020301_000000_20200101_000000
PC1 ADFs		ATS_PC1_AXVIEC20120618_153111_20020301_000000_20101022_000000
			ATS_PC1_AXVIEC20120618_154211_20101022_000000_20200101_000000
DEM ADF		AUX_DEM_AXVIEC20091201_000000_20020321_000000_20200101_000000

NON-UPDATED ITEMS:
==================
BRW ADF		ATS_BRW_AXVIEC20020123_072338_20020101_000000_20200101_000000
GC ADF		ATS_GC1_AXVIEC20070720_093834_20020301_000000_20200101_000000
INS ADF		ATS_INS_AXVIEC20070720_094014_20020301_000000_20200101_000000
LST ADF		ATS_LST_AXVIEC20101018_094830_20020301_000001_20200101_000000
PC2 ADF		ATS_PC2_AXVIEC20020123_074151_20020101_000000_20200101_000000
----------------------------------------------------------------------

Note that the contents of the DEM ADF have not changed; it was simply re-released with a validity range spanning the whole Envisat mission.
In addition to the static files shown in Table 1, new dynamic auxiliary files were also used:
•	Visible Calibration VC1 files (ATS_VC1_AX): a complete dataset for the entire mission has been generated and was used; these are a new generation of VC1 files and contain the measured long-term drift correction.
•	Orbit State Vector OSV files (DOR_VOR and AUX_FRO): the reprocessing preferentially used the Version D DOR_VOR dataset, which is more complete and is of higher resolution than the operationally used AUX_FRO files.