CHRIS

Imaging Spectrometers/Radiometers

Passive Remote Sensing

Spectrometers/Radiometers

PROBA-1

Agriculture

Biosphere

Forestry

Oceans

Surface Water

Terrestrial Hydrosphere

Vegetation

<p>CHRIS acquired a set of up to five images of each target during each acquisition sequence, these images were acquired when Proba-1 was pointing at distinct angles with respect to the target.</p>

<p>CHRIS Level 1A products (supplied in HDF data files, version 4.1r3) include five formal CHRIS imaging modes, classified as modes 1 to 5:</p>

<table class="eogtable">
	<tbody>
		<tr>
			<td class="eogtable-heading">Mode</td>
			<td class="eogtable-heading">Name</td>
			<td class="eogtable-heading">Swath</td>
			<td class="eogtable-heading">Spectral Bands</td>
			<td class="eogtable-heading">Nadir ground sampling distance</td>
		</tr>
		<tr>
			<td>MODE 1</td>
			<td> </td>
			<td>Full swath width</td>
			<td>62 (773nm / 1036nm)</td>
			<td>34m @ 556km</td>
		</tr>
		<tr>
			<td>MODE 2</td>
			<td>WATER BANDS</td>
			<td>Full swath width</td>
			<td>18</td>
			<td>17m @ 556km</td>
		</tr>
		<tr>
			<td>MODE 3</td>
			<td>LAND CHANNELS</td>
			<td>Full swath width</td>
			<td>18</td>
			<td>17m @ 556km</td>
		</tr>
		<tr>
			<td>MODE 4</td>
			<td>CHLOROPHYL BAND SET</td>
			<td>Full swath width</td>
			<td>18</td>
			<td>17m @ 556km</td>
		</tr>
		<tr>
			<td>MODE 5</td>
			<td>LAND CHANNELS</td>
			<td>Half swath width</td>
			<td>37</td>
			<td>17m @ 556km</td>
		</tr>
	</tbody>
</table>

<p> </p>

<p><strong>Spatial coverage:</strong>&nbsp;Check the spatial coverage of the collection on a&nbsp;<a href="https://tpm-ds.eo.esa.int/smcat/PROBA1-CHRIS/" target="_blank">map</a>&nbsp;available on the Third Party Missions Dissemination Service.</p>

CHRIS Data Format

Latest quicklooks

Proba-1 CHRIS acquisition Plan

Note on CHRIS Acquisition Procedure and Image Geometry

Guidelines for the submission of Project Proposal

Get Help?

<p>Utilisation of this data is subject to ESA's Earth Observation Terms and Conditions.</p>

<p>The FSSCat collection provides hyperspectral data coverage over a number of locations around the world, as measured by the HyperScout 2 sensor.</p>

<p>The FSSCat hyperspectral data products are comprised of 50 spectral bands, covering a spectral range of 450 – 950 nm with a spectral resolution of 18 nm (at FWHM). Imagery is available with an along-track ground sampling distance (GSD) of 75 m. To ensure a high degree of radiometric accuracy, HyperScout 2 data are validated through comparison with Sentinel-2 data products.</p>

<p>The processing level of the data is L1C – calibrated top-of-atmosphere radiance, reflectance or brightness temperature. The raster type of the L1C data product is a GRID – a 2D or 3D raster where the (geo)location of the data is uniquely defined by the upper left pixel location of the raster and the pixel size of the raster, and the projection parameters of the raster (if georeferenced). The third dimension can e.g. be a spectral or third spatial dimension.</p>

<p>The L-1C VNIR data product includes a hyperspectral cube of TOA reflectance in the VNIR range, as well as relevant meta-data that adheres to EDAP's best practice guidelines. This product consists of georeferenced and ortho-rectified image tiles that contain spectral reflectance data at the top-of-the-atmosphere. Each image tile contains radiometrically corrected and ortho-rectified band images that are projected onto a map, as well as geolocation information and the coordinate system used. Additionally, each image pixel provides TOA spectral reflectance data in scaled integers, conversion coefficients for spectral radiance units, viewing and solar zenith and azimuth angles, and quality flags.</p>

FSSCat products

In cooperation with CONAE (Comisión Nacional de Actividades Espaciales), ESA is launching an Announcement of Opportunity for the international scientific community to access data from the SAOCOM mission for science and EO-based applications development.

Announcement of Opportunity for SAOCOM

<p>GEOSAT-2 Portugal coverage is a collection of 2021 data over the Portugal area, including islands. The available dataset has a cloud cover less than 10%, and is acquired up to 1m resolution with Geometric accuracy &lt;6m CE90 based on Copernicus DEM @10m.</p>

<figure class="centered-mobile-centered"><a data-lightbox="GEOSAT-2-Portugal" data-title="GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset" href="/documents/20142/4279060/GEOSAT2_Portugal_Coverage.png"><img alt="GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset" src="/documents/20142/4279060/GEOSAT2_Portugal_Coverage_Smaller.jpg/3e2c84ea-17e7-c8b6-ed57-b079e1851142?t=1677155961453&amp;download=true" style="margin: 10px;" /></a>

<figcaption style="text-align: center;"><i>GEOSAT-2 Portugal 2021 - Spatial Coverage of the Dataset</i></figcaption>
</figure>

<p>The following product types are available:</p>

<ul>
	<li><strong>Pan-sharpened (4 bands, 321 Natural Colours or 432 False Colours):</strong> A four-band image, resulting from adding the information of each multispectral band to the panchromatic band. The fusion does not preserves all spectral features of the multispectral bands, so it should not be used for radiometric purposes. Resolution 1m; Bands: All, R-G-B or Ni-R-G</li>
	<li><strong>Bundle: </strong>Panchromatic (1m resolution) + Multispectral bands (4m resolution): five-band image containing the panchromatic and multispectral products packaged together, with band co-registration.</li>
</ul>

<p>The available processing level is L1C orthorectified: a calibrated and radiometrically corrected product, manually orthorectified and resampled to a map grid.</p>

<table class="eogtable">
	<tbody>
		<tr class="eogtable-heading">
			<td rowspan="2">Product Type</td>
			<td colspan="2">Processing Level and Spatial Resolution</td>
		</tr>
		<tr class="eogtable-heading">
			<td>L1B (native)</td>
			<td>L1C (ortho)</td>
		</tr>
		<tr>
			<td>Pan-sharpened</td>
			<td>1.0m</td>
			<td>1.0m</td>
		</tr>
		<tr>
			<td>Bundle (PAN+MS)</td>
			<td>1.0m (P), 4.0m (MS)</td>
			<td>1.0m (P), 4.0m(MS)</td>
		</tr>
	</tbody>
</table>

GEOSAT-2 Portugal Coverage 2021

<p>A large number of European cities are covered by this dataset; for each city you can find one or more Cartosat-1 ortho image products and one or more Euro-Maps 3D DSM tiles clipped to the extent of the ortho coverage.</p>

<p>The Euro-Maps 3D DSM is a homogeneous, 5 m spaced Digital Surface Model semi-automatically derived from 2.5 m Cartosat-1 in-flight stereo data with a vertical accuracy of 10 m. The very detailed and accurate representation of the surface is achieved by using a sophisticated and well adapted algorithm implemented on the basis of the Semi-Global Matching approach. The final product includes several pixel-based quality and traceability layers:</p>

<ul>
	<li>The dsm layer (*_dsm.tif) contains the elevation heights as a geocoded raster file</li>
	<li>The source layer (*_src.tif) contains information about the data source for each height value/pixel</li>
	<li>The number layer (*_num.tif) contains for each height value/pixel the number of IRS-P5 Cartosat-1 stereo pairs used for the generation of the DEM</li>
	<li>The quality layer (*_qc.tif) is set to 1 for each height/pixel value derived from IRS-P5 Cartosat-1 data and which meets or exceeds the product specifications</li>
	<li>The accuracy vertical layer (*_acv.tif) contains the absolute vertical accuracy for each quality controlled height value/pixel.</li>
</ul>

<p>The ortho image is a Panchromatic image at 2.5 m resolution. The following table defines the offered product types.</p>

<table class="eogtable">
	<tbody>
		<tr class="eogtable-heading">
			<td>EO-SIP product type</td>
			<td>Description</td>
		</tr>
		<tr>
			<td>PAN_PAM_3O</td>
			<td>IRS-P5 Cartosat-1 ortho image</td>
		</tr>
		<tr>
			<td>DSM_DEM_3D</td>
			<td>IRS-P5 Cartosat-1 DSM</td>
		</tr>
	</tbody>
</table>

European Cities: Cartosat-1 Euro-Maps 3D

<p>The Atmospheric Carbon-dioxide Grating Spectrometer (ACGS) instrument is pushbroom spectrometer operating in NIR and SWIR bands which allows the measuring of CO2 mole fraction.</p>

<p>The available ACGS products have a temporal coverage between March 2017 and January 2020 (not all days included in the time frame):</p>

<ul>
	<li>L1A DS: Sample Dark Calibration sample product</li>
	<li>L1A GL: Sample Glint Sample products</li>
	<li>L1A LS: Sample Lamp Calibration sample product</li>
	<li>L1A ND: Principal-Plane Nadir Sample product</li>
	<li>L1A ZS: Sample Z-Axis Solar Calibration Sample</li>
	<li>L1B CAL DS: Sample Dark Calibration product</li>
	<li>L1B CAL LS: Sample Lamp Calibration product</li>
	<li>L1B CAL ZS: Sample Z-Axis Solar Calibration product</li>
	<li>L1B SCI GL: Sample Glint Science product</li>
	<li>L1B SCI ND: Principal-Plane Nadir Science product.</li>
</ul>

<p> </p>

<p>The Cloud Aerosol Polarization Imager (CAPI) is a pushbroom radiometer in VIS, NIR and SWIR bands for the observation of aerosols and clouds optical properties.</p>

<p>The CAPI products are available in a time range from July 2019 and January 2020 (not all days included in the time frame):</p>

<ul>
	<li>L1A ND: Principal-Plane Nadir product</li>
	<li>L1B ND 1000M: Principal-Plane Nadir products at 1000 m resolution (1375 nm, 1640 nm)</li>
	<li>L1B ND 250M: Principal-Plane Nadir products at 250 m resolution (380 nm, 670 nm, 870 nm)</li>
	<li>L1B ND GEOQK: Principal-Plane Nadir georeferenced at 250 m resolution</li>
	<li>L1B ND GEO1K: Principal-Plane Nadir georeferenced at 1000 m resolution</li>
	<li>L1B ND OBC: Principal-Plane Nadir on-board calibrator product</li>
	<li>L2 ND CLM: Principal-Plane Nadir cloud flag product.</li>
</ul>

TanSat AGCS and CAPI products

Daniel Heywood

Mission

admin admin

Earth Observation Satellite

TOPEX/POSEIDON

Joint Polar Satellite System - 2 planned for 2022

JPSS-2

Joint Polar Satellite System - 3 planned for 2026

JPSS-3

Joint Polar Satellite System - 4 planned for 2031

JPSS-4

Swarm-B

Swarm-A

Swarm-C

FY-3B

Nimbus-4

CloudSat

Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations

CALIPSO

GOSAT-2

GOSAT (Greenhouse gases Observing Satellite) is a JAXA (Japan Aerospace Exploration Agency) mission within the GCOM (Global Change Observation Mission) program of Japan. The GOSAT mission goals call for the study of the transport mechanisms of greenhouse gases such as carbon dioxide (CO2) and methane (CH4).

GOSAT-1

NOAA-20

TIROS

TIROS-N

GMS (Japan Geostationary Meteorological Satellite)

GMS-5

GRACE SCA

GRACE LRR

PRARE

Spectrometers

Interferometric Radiometers

Interferometers

GRACE INTERFEROMETER

GRACE ACC

HRPAN

SAPHIR

ATMS

TRSR

SSTI

GNSS

Cryosphere

Glaciers and Ice Sheets

Sea Ice

Snow and Ice

Frozen Ground and Permafrost

Land Surface

Surface Radiative Properties

Surface Thermal Properties

Landscape

Erosion and Sedimentation

Geomorphic Landforms and Processes

Soils

Soil Moisture

Soil Texture

Soil Classification

Organic Matter

Soil Erosion

Carbon

Permafrost

Land Use and Land Cover

Admin Eversis

Upcoming

Status

Current

Past

Conference

Event type

Meeting

Training

Workshop

Chris Mortimore

Sessions

Data Innovation and Science Cluster

Projects subtype

EO Science for Society

National

Space Situational Awareness

Support To Science Element

A Fast Registration request must be submitted to access these data collections. Following user authentication, access to the data are provided within two working days.

Fast Registration with approval (Restrained)

Data Access Type FedEO

Procedures requiring evaluation

Access to these data collections are provided through services external to ESA. Learn more about access conditions on the data providers’ websites.

External Data (Restrained)

A Fast Registration request must be submitted to access these data collections. Access is provided as soon as the request is submitted.

Fast Registration with immediate access (Open)

These data collections are free and open to access for anyone with an active account in ESA’s EO Sign In system.

EO Sign In Authentication (Open)

Access to these data collections is free and open to everyone.

Open access (Open)

A Project Proposal must be submitted to access these Third Party Mission data collections, describing the proposed use of the data and the team involved in the project.

Project Proposal (Restrained)

Data Service Requests must be submitted to access ERS-1/2 and Envisat (A)SAR level zero data.

Proba-1 CHRIS Level 1A

How To Access Data

Description

Details

DATA SET SPECIFICATIONS

PROCESSING LEVEL

APPLICABLE TERMS & CONDITIONS

RESOURCES

newsletter

Cookies & Privacy

Mode	Name	Swath	Spectral Bands	Nadir ground sampling distance
MODE 1		Full swath width	62 (773nm / 1036nm)	34m @ 556km
MODE 2	WATER BANDS	Full swath width	18	17m @ 556km
MODE 3	LAND CHANNELS	Full swath width	18	17m @ 556km
MODE 4	CHLOROPHYL BAND SET	Full swath width	18	17m @ 556km
MODE 5	LAND CHANNELS	Half swath width	37	17m @ 556km